The plant maintenance software you’ve been looking for

Book a demo
Brinks logo
Cat – Energy Power Systems logo
Darden logo
Hitachi logo
Kubota logo
RAM logo
Safety Culture logo
Scully logo
Vestas logo

Plant maintenance software that runs on what your equipment is actually doing

Most operations run on two sets of numbers. There’s what your plant maintenance management software recorded, and there’s what the machines actually did. The gap is where servicing slips and utilisation reporting stops reconciling. Plant serviced on a calendar that assumes conditions nobody works in, while machines idle on a site that finished weeks ago. Then there are the faults that showed up in the data long before anyone acted on them.

Plant maintenance software should run on machine data, not on a schedule set at the start of the year. Perspio™ connects the telematics on your plant to the systems and people you already have, cleans and standardises what comes back, applies your business rules, then tells you what needs doing and what’s been missed.

What can Perspio™ do for you?

Mixed plant fleets already generate the data. It’s sitting in OEM portals, GPS trackers and service logs that don’t always talk to each other. Perspio™ connects them, cleans and standardises what comes back, applies your business rules, and turns it into next best actions in the systems your team already uses.

AI for asset management

Perspio™ cleans your plant and equipment data, contextualises it and puts it to work, flagging machines that need attention, surfacing patterns and automating the reporting your team builds by hand. It’s industrial AI on a foundation you can trust.

Predictive maintenance

Servicing triggered by actual runtime, load and fault codes rather than a fixed interval. Perspio™ reads what each machine has been through and flags what needs attention before it fails, so plant comes off the job on your schedule.

Equipment service management

Scheduling the work is the easy part. Perspio™ goes further, tracking each job through to completion against the asset, so you can see what’s been signed off, what’s overdue and which plant is running past its service window right now.

Fleet analytics

Plant is one part of the construction equipment management software picture. Utilisation and availability by asset, category, site and project, across the whole mixed fleet, so decisions run on hours the machines actually logged.

Preventative maintenance

Service intervals that follow real hours, not the calendar. Scheduled work planned around where plant is and what it’s committed to, so servicing happens between jobs rather than in the middle of one.

Asset tracking

Plant tracking software that shows which site every machine is on and how long it’s been sitting there. Geofences flag plant that leaves site or arrives somewhere it shouldn’t. Machines idle between projects surface before they’re needed elsewhere.

Ready to close the gap between the schedule and the machine?

Book a demo

Industrial AI for plant maintenance management

AI is only as good as the data underneath it. Here’s how we can help to get your assets, data and workforce ready.

Industrial AI Foundations

AI runs on data. If yours sits in four systems that each report the same thing differently, the model has nothing solid to work from. Foundations first, then intelligence.

Operational Efficiency

Perspio™ automates the manual work sitting on top of your operational data (chasing information, rebuilding reports, reconciling systems), so your team stops doing it by hand.

Asset Management

Every asset tells you what it needs. Perspio™ reads location, runtime and condition data across your whole operation, then flags what needs attention before it becomes a problem.

We map how your plant actually gets maintained

Before any technology decision, we go through your workflows. How service intervals get set, who books the work, where the hours come from and which handoffs run on someone’s memory. Operations first, technology second.

01

We connect what you’re already running

Mixed OEM telematics across a mixed fleet. GPS trackers, ERP, maintenance and project systems. Perspio™ connects all of it, so you’re cutting logins rather than adding another portal. No migration project.

02

We clean and standardise the data

Different machines report runtime, load and faults in different formats. Perspio™ cleans, standardises and contextualises every feed into one source of truth, so the service history and utilisation numbers hold up under scrutiny.

03

We automate the manual work

Servicing triggered on runtime, not on a calendar. Fault alerts routed to whoever books the work. Utilisation and availability reporting built automatically. The spreadsheet work at the end of every month, done for you.

04

We get your data ready for Industrial AI

Clean, connected operational data is what Industrial AI runs on. You move to predictive maintenance, failure forecasting and automated scheduling when the business is ready, not because a vendor said so. Then Perspio™ closes the loop, telling you what’s actually been done and what’s been missed.

05

Ready to close the gap between the schedule and the machine?

Book a demo

Frequently asked questions

Straight answers on how plant maintenance software works when your assets are spread across sites, vendors and systems.

Plant maintenance software schedules and records servicing across a plant fleet. Most systems run on fixed calendar intervals. Perspio™ connects to the telematics already on your machines, so servicing follows actual runtime, load and fault data rather than an assumption made at the start of the year.

Yes. Perspio™ sits above individual OEM portals and GPS platforms rather than replacing them, so plant from any manufacturer with any tracker appears in a single view. Plant and equipment management software that covers the whole fleet, whatever badge is on it.

Perspio™ reports runtime by asset, category, site and project, drawn from machine data rather than manual entry. Utilisation and availability appear on the same dashboard, so plant sitting idle between projects gets picked up before it’s hired in somewhere else.

Preventative maintenance runs on intervals, whether that’s hours or months. Predictive maintenance uses condition and fault data to flag a machine before it fails. Perspio™ supports both, and most operations move from one to the other as their data gets cleaner.

Yes. Perspio™ feeds clean machine data into the ERP, CMMS or maintenance system you already run, or acts as the front end if you’d rather work in one place. Either way, the hardware and software you’ve already paid for keeps earning.

Yes. Location, availability and service status for every machine across every site, in one view. Site teams stop driving between projects to find gear, and plant and equipment coming free at the end of one job is visible to the next before anyone hires a replacement.

Perspio™ works wherever mobile plant runs. As construction plant management software it covers plant moving between projects and sites. The same plant management software handles mining, civil, utilities and hire fleets, because the data problem is the same: mixed machines, mixed telematics, one operation.

Plant asset management software covers the whole life of a machine: where it is, how it’s used, what condition it’s in, when it’s due for replacement. Plant maintenance software is one part of that. Perspio™ does both from the same clean data, so servicing and utilisation reconcile.

Yes. Perspio™’s plant condition management software capability reads runtime, load, fault codes and sensor data to show what state a machine is actually in. Perspio™ surfaces that data alongside location and utilisation, so your plant manager sees plant condition and availability in the one platform.

Perspio™ isn’t plant hire software in the sense of a hire desk or rate card system. Instead, it enhances your existing plant hire software by telling it what the machines actually did: on-site hours, idle time, off hire dates that match reality. Where you hire plant in, the same data shows what’s already sitting idle across your own fleet.

Perspio™ feeds and enhances your existing plant and equipment safety management software. Runtime, location, operator and condition data flow into the compliance and safety systems you already run, so records are built from machine data rather than paperwork. Australian operations use the same clean feed for pre-start records, servicing evidence and asset certification status.

Perspio™ is a data layer, not an incident management system. Where you run plant floor incident management software, Perspio™ supplies the machine context around an event: what the equipment was doing, its condition and who was operating it. The investigation happens in your system, on better evidence.

Yes, and scale is the point. Perspio™ standardises every feed before it drives a decision, so adding machines, sites or a new OEM doesn’t mean rebuilding the reporting. Scalable predictive maintenance software for industrial plants has to handle mixed equipment without a migration project each time.

Manufacturing plant management software usually means fixed production lines. Perspio™ is built for mobile plant and equipment, so on a manufacturing site it covers forklifts, loaders, yard equipment and site vehicles. For fixed process equipment, talk to us about what your existing systems already capture.

Perspio™ runs wherever the assets are. For operations looking for equipment integrity management software for US plants, it connects the OEM telematics, sensors and maintenance records behind mixed equipment into one consistent source, then feeds integrity and condition data into the systems your reliability team already uses.