The temperature monitoring system you’ve been looking for

Book a demo
Brinks logo
Cat – Energy Power Systems logo
Darden logo
Hitachi logo
Kubota logo
RAM logo
Safety Culture logo
Scully logo
Vestas logo

Temperature monitoring system that runs on what your equipment is actually doing

Most operations run on two sets of records. There’s what got written down, and there’s what the temperature actually did. The gap is where product is lost and compliance records stop holding up. A fridge drifts overnight and recovers before the morning check, a warehouse zone has no sensor in it at all, and the reading that does get logged goes down from memory at the end of a shift.

A temperature monitoring system should run on continuous sensor data, not on a reading taken twice a day. Perspio™ connects the sensors across your sites and vehicles to the systems and people you already have, cleans and standardises what comes back, applies your business rules, then tells you what needs doing and what’s been missed.

What can Perspio™ do for you?

Temperature-controlled operations already generate the data. It’s sitting in fridge controllers, warehouse sensors and reefer units that don’t always talk to each other. Perspio™ connects them, cleans and standardises what comes back, applies your business rules, and turns it into next best actions in the systems your team already uses.

AI for asset management

Perspio™ cleans your sensor and equipment data, contextualises it and puts it to work, flagging units that need attention, surfacing patterns across sites and automating the reporting your team builds by hand. Industrial AI on a foundation you can trust.

Environmental monitoring

Temperature and humidity recorded continuously across every zone, unit and vehicle. Remote temperature monitoring means an excursion is flagged as it happens rather than found at the next check, with a complete record instead of a sampled one.

Fleet monitoring

Fleet temperature monitoring for reefers and refrigerated vans, tied to location and runtime. Cold chain management software that knows what temperature a load is holding and where it is, so a problem in transit surfaces while there’s still time to act on it.

Operational risk management

An excursion is only half the problem. Perspio records who was alerted, what they did and how long the unit sat outside range, so a temperature event comes with the response attached rather than a gap someone has to explain.

Asset safety and compliance

Certification and servicing records held against each unit, with monitoring data attached. When an auditor asks whether a unit was maintained and performing, the evidence sits in one place rather than across three systems.

Facilities monitoring

Warehouse temperature monitoring across every zone, plus the equipment holding it there. A refrigeration monitoring system that watches door events, compressor performance and ambient conditions, so a failing unit shows up before the product does.

Ready to close the gap between the temperature log and the load?

Book a demo

Industrial AI for food safety

AI is only as good as the data underneath it. Here’s how we can help to get your assets, data and workforce ready.

Industrial AI Foundations

AI runs on data. If yours sits in four systems that each report the same thing differently, the model has nothing solid to work from. Foundations first, then intelligence.

Operational Efficiency

Perspio™ automates the manual work sitting on top of your operational data (chasing information, rebuilding reports, reconciling systems), so your team stops doing it by hand.

Asset Management

Every asset tells you what it needs. Perspio™ reads location, runtime and condition data across your whole operation, then flags what needs attention before it becomes a problem.

We map what you’re monitoring and why

Before any technology decision, we go through your workflows. Which units and zones matter, who needs to know when something drifts, how an excursion gets escalated and which handoffs run on someone’s memory. Operations first, technology second.

01

We connect every sensor and system you run

Fridge and freezer controllers, warehouse sensors, IoT loggers, reefer telematics, ERP and the compliance system your team already works in. Perspio™ connects all of it, so you’re cutting logins rather than adding another platform. The hardware you’ve already installed keeps earning.

02

We clean and standardise the data

Different sensors report temperature in different formats and at different intervals. Perspio™ cleans, standardises and contextualises every feed into one source of truth, so the record holds up when a customer, an auditor or your team checks it.

03

We automate the manual work

Continuous temperature data logging in place of manual checks. Excursion alerts routed to whoever can act on them. Compliance reporting built automatically from the same data your team already relies on, rather than transcribed after the fact.

04

We get your data ready for Industrial AI

Clean, connected operational data is what Industrial AI runs on. You move to predictive intervention and failure forecasting when the business is ready, not because a vendor said so. Then Perspio™ closes the loop, telling you what’s actually been done and what’s been missed.

05

Ready to close the gap between the temperature log and the load?

Book a demo

Frequently asked questions

Straight answers on how a temperature monitoring system works when your sensors, sites and systems don’t currently talk to each other.

A temperature monitoring system records conditions continuously across the units, zones and vehicles holding temperature-sensitive product. Perspio™ handles the data layer underneath: connecting mixed sensors and controllers into one consistent record, then feeding that into the compliance and operational systems your team already works in.

Sensors report continuously to Perspio™ rather than waiting on someone with a clipboard. Conditions are captured between checks as well as during them, so a unit that drifts and recovers unseen still lands on the record. Alerts route to whoever can act, wherever they are.

Yes. In Perspio™, fridge monitoring system, a cold room and a whole warehouse zone all appear in the same view, whatever hardware each one runs. Warehouse temperature monitoring sits alongside individual unit data, so a problem shows up as a pattern rather than as separate incidents.

Yes. Perspio™ is vendor-agnostic and sits above individual sensor platforms and controller portals rather than just replacing them. Mixed hardware across mixed sites is the normal starting point. The sensors you’ve already installed keep earning rather than being ripped out.

Yes. The Perspio™ fleet temperature monitoring system covers reefers and refrigerated vans alongside your fixed sites, so product doesn’t drop out of view the moment it leaves the dock. Useful for food distribution fleets where the same consignment has to be evidenced through storage and transit.

Perspio™ keeps reading, excursion, alert and intervention, logged automatically against the unit and cleaned before it lands. Temperature monitoring software that samples on a schedule leaves gaps between checks, so Perspio’s™ continuous logging means the record is complete when someone asks for last quarter.

Continuous data means Perspio™ builds the record rather than simply reconstructing it. For food distribution fleets, conditions are logged against the vehicle and the load through the whole journey, so evidence of temperature and handling comes from the sensors rather than from a driver’s paperwork.

A supplier platform shows you that supplier’s units in that supplier’s format. Perspio™ sits above all of them, so mixed equipment across mixed sites appears as one picture. You keep the hardware you’ve got rather than standardising on one manufacturer to get one view.